neoperl - flow, stop and go
PCW-02 Database

PCW-02 Washer Regulator 1/2"

Colour Code
Flow Regulator
Colour
Elastomer
Flow Rate part no.
l/min  gpm
dark grey  white   2.5 gpm 58.9175.1
yellow  white   2.2 gpm 58.9174.1
lilac  white   2.0 gpm 58.9173.1
light blue  white   1.75 gpm 58.9172.1
green  white   1.5 gpm 58.9171.1
blue  white   1.0 gpm 58.9170.1
red grey 12,0   58.9094.1
light blue  grey 10,0   58.9092.1
orange  grey 9,0   58.9091.1
white  grey 8,0   58.9090.1
light green  grey 7,0   58.9089.1
black  grey  6,0   58.9088.1
yellow  grey 5,0   58.9087.1
dark grey  grey  4,0   58.9086.1
olive  grey 2,0    58.9085.1

Technical information PCW-02

  • washer height 2.5 mm; minimum bore depth 9.5 mm
  • requires only gentle hand-tightening
  • for 11 to 16 mm bore diameters

In order to easily identify the complete PCW product range, the elastomer component will be colour coded as well from now on.
The PCW-02 elastomer component is the outer ring around the flow regulator.

The new distinctive feature:

metric flow rates = grey elastomer component
US flow rates = white elastomer component

This identification improvement entails no technical or approval relevant implications.

 

PCW-02 LP Washer Regulator 1/2" - for low pressure areas

Colour Code Flow Rate Part No.
l/min gpm  
red 12.0    58.9612.1
light blue 10.0    58.9610.1
orange 9.0    58.9609.1
white 8.0    58.9608.1
light green 7.0    58.9607.1
black 6.0    58.9606.1
yellow 5.0    58.9605.1
dark grey 4.0    58.9604.1
beige 3.0    58.9603.1

Note: The PCW-02 LP models and their corresponding sales drawing will be soon available.

Technical information PCW-02 LP

  • optimal performance at any pressure from 0.2 to 4.0 bar
  • washer height 2.5 mm; minimum bore depth 9.5 mm
  • requires only gentle hand-tightening
  • for 13 to 16 mm bore diameters